3 Ways You Can Reinvent GARAGE DOOR REPAIR Without Looking Like An Amateur

Garage door repair may often be achieved by the homeowner themselves. You can find at least 5 simple things to check, before calling a specialist. Some repairs are really easy. For instance, a stiff or a squeaky door will merely require a good cleaning and lubrication. Other repairs, such as for example repairing a torsion spring, are really dangerous and require help from the professional.

Before proceeding to the repair, be sure to unplug your garage door opener, so you do not get a power shock while you are repairing your garage door. You’ll most likely be standing on a ladder, that is a very bad place to get an electric shock, because you could also fall off the ladder. Also, remember to wear safety glasses whenever using power tools.

Here is a set of what to check before calling for a specialist for the garage door repair:

1. Check the Metal Tracks for Damages

This easy garage door repair tip may often solve the issue very fast. The metal tracks often may have dents or bumps. If you discover any such damages, strike the damaged part of the track with a wood block and a hammer to straighten the track.

2. Check the Alignment of the Tracks

If the tracks are not aligned well, they might be causing the door not to work. It’s not always essential to unscrew the tracks; you can just try to loosen the bolts or screws garage door repair North Las Vegas also to tap the tracks slightly into position. Use a level to check the alignment of the tracks. Aligned tracks will let you be done with your garage door repair very quickly.

3. Dry and clean the Tracks

Even though it may sound obvious, but hardened dirt and old lubricant may be the reason behind the garage door sticking. In this instance, your garage door repair may consist of merely cleaning the tracks and then drying them. You can use regular cleaners to clean the tracks.

4. Lubricate the Tracks and the Rollers

Merely lubricating both, the tracks and the rollers, can fix the problem and conclude your garage door repair very quickly. For lubrication, you may use a lubricant spray or a silicon spray. It is probably easier to lubricate the tracks after cleaning them. Actually, any movable part will reap the benefits of lubrication.

5. Tightening the Loose Bolts and Screws

Bolts and screws have a tendency to become loose with time. Try to check each of the screws and bolts involved in the opening/closing mechanism of your door. Sometimes, merely tightening them may solve the complete problem. If you fail to tighten the screws, because the holes themselves have grown to be loose, then you can work with a “wood filler” or pieces of normal wood to fill the holes.

What Not to Do?

If you have tried each and every among the above solutions, and do not require have worked, the problem could be the door spring. However, it really is advised never to perform your garage door repair if the problem is apparently the spring, especially if it’s a torsion spring. Unfortunately, there have been numerous cases, where folks have gotten injured and even killed by the garage door springs. One of the most common injuries is really a hit in the head, resulting in serious trauma to the brain.